Tire Basics

Includes: Pump out used fluid and refill with OEM grade fluid with build in limited slip additive Inspect oil fluid for contamination and metal fragments Inspect breather valve Test drive

Includes: Pump out used fluid and refill with OEM grade fluid with built in limited slip additive Inspect vent cap and look for leaks If required, remove differential cover, inspect gears, and re-install cover

Includes: Pump out used fluid and refill with OEM grade fluid with built in limited slip additive Inspect vent cap and look for leaks If required, remove differential cover, inspect gears, and re-install cover

Includes: Inspect calipers and brake operation Clean and lubricate caliper sides to prevent premature brake water

Includes: Inspect calipers and brake operation Clean and lubricate caliper sides to prevent premature brake water

Using the latest in state-of-the-art technology, we will install a safe and effective cleaner to suspend harmful varnish and sludge from the transmission valve body, torque converter and lines. Install new high-tech fluid with conditioners. Every 30,000 miles.

Perform computer 4-wheel balance and tire rotation. Perform front end alignment. Perform front brake caliper service. Perform rear brake caliper service or rear clean and adjust if vehicle is equipped with drains.

Our technicians will use specialized chemistry to clean the throttle plate, throttle body housing and the air intake system. Install BG 44K fuel treatment to the tank. This service will improve throttle response and help restore fuel economy. Every 15,000 miles.

Using specialized equipment our technicians will quickly and effectively clean intake manifold, ports, intake valves, combustion chamber and fuel injectors. Install injector cleaning additive in tank. This service may restore lost power, performance and will reduce harmful exhaust emissions. Every 15,000 miles.

Remove old worn out gear oil from the front and rear differential. Install new, high tech synthetic BG Ultra-Guard Gear Oil (R). Includes BG Limited Slip Additive. Install BG SyncroShift in transfer case. Every 30,000 miles $349.95; Front Diff Service $149.95; Rear Diff Service $119.95; Transfer Case Service $129.95.

Visually inspect all fittings and hoses. Disinfect and deodorize A/C system. Install Frigi-Quiet oil to quiet compressor and reduce wear. (Refrigerant extra).

$144.95 Both Axles. Remove brake calipers and slides. Clean corrosion from brake pins. Apply grease specially formulated for brake applications.

Our technicians use a powerful cleaner to dissolve gum and varnish in your car's power steering unit. Next we remove old, worn-out, contaminated fluid and install fresh new fluid fortified with special antioxidant and anti-wear ingredients to deter expensive mechanical failure. Every 30,000 miles.

Unlike the old method of simply draining the coolant from the engine, our cooling system service is much more thorough. Our process backflushes the engine cooling system, removing scale and debris not accessible when going with the normal direction of coolant flow. The special cleaners and additives provide outstanding protection even on heavy duty use. Recommended every 3 years or 60,000 miles.

Change engine oil and filter (up to 6 qts of 5W-30 oil). Lubricate chassis. Check and fill fluids. Install BG Engine Protection Service Kit (R) (Includes BG MOA(R) Oil Additive and BG CF5(R) Fuel Additive). Inspect engine coolant, components, hoses, and clamps (as required). Inspect brakes. Rotate and balance tires, set air pressure, reset TPMS. Perform BG Transmission Fluid Exchange. Test and inspect battery. Replace air filter (where required). Lubricate all hinges, latches and door locks. Lubricate suspension, steering linkage and transaxle shift linkage. Perform Multi-Point Inspection Report Card.

Change engine oil and filter (up to 6 qts of 5W-30 oil). Lubricate chassis. Check and fill fluids. Install BG Engine Protection Service Kit (R) (Includes BG MOA(R) Oil Additive and BG CF5(R) Fuel ADditive). Inspect engine coolant, components, hoses and clamps (as required). Inspect wiper blades. Inspect brakes. Rotate and balance tires, set air pressure, reset TPMS. Replace air filter (where required). Inspect throttle system. Check air intake system. Inspect restraint system components. Inspect exhaust system for leaks or damage. Test and inspect battery. Lubricate all hinges, latches, door locks and body components. Inspect passenger cabin air filter (replace at additional charge). Lubricate suspension, steering linkage and transaxle shift linkage. Perform Multi-Point Inspection Report Card.